2019 NAPA Reference Guide

Remote Mount Bases These remote mount bases may be used in a variety of applications including lube, fuel, hydraulic and transmission. They feature double inlet and outlet horizontal ports. Two brass plugs are included for blocking off the unused ports. Three mounting holes are provided. A variety of filters may be selected from the list below. Note: When remote mountings are used for spin-on lube, hydraulic and transmission applications, the system must be protected with a bypass relief valve. The lube and hydraulic filters listed all have built in bypass valves. Caution: When selecting a filter for use on these remote bases, size, flow rate and performance characteristics must be considered. Contact the NAPA Technical Service Department for assistance. Part No. Dimensions Filter Thread Oil Line Threads 4763 Length – 4.090” Width – 3.100” Height – 1.850” 11/16” – 16 1/2” N.P.T. Female 4076 (Dual Port) Length – 4.050” Width – 3.090” Height – 1.870” 3/4” - 16 1/4”-18 N.P.T. Female 4093 (Dual Base) Length – 6.950” Width – 3.090” Height – 1.870” 3/4” - 16 1/2”-14 N.P.T. Inlet and Outlet 4764 Length – 4.090” Width – 3.100” Height – 1.810” 3/4” – 16 1/2” N.P.T. Female 4766 Length – 4.230” Width – 3.500” Height – 1.860” 13/16” – 16 1/2” N.P.T. Female 4081 Length – 4.060” Width – 3.090” Height – 1.870” 1” - 12 1/4”-18 N.P.T. Female 4768 Length – 4.090” Width – 3.100” Height – 1.810” 1” – 12 1/2” N.P.T. Female 4023 Length – 4.050” Width – 3.090” Height – 1.870” 1” - 14 1/4”-18 N.P.T. Female 4770 Length – 4.090” Width – 3.100” Height – 1.810” 1” - 14 1/2” N.P.T. Female 1060